Tubular Heaters

Tubular Heaters

DELIVERY TIME 2023: Currently we have 5-6 weeks delivery time on all tubular heaters Ø8.5mm Ø6.5mm regardless of material from 5 pieces order quantity. 

Tubular heaters can be made stretched or bent according to customer's drawing. The area of application are mould tools and plate heaters. For liquids and gases, especially screw-in variants are preferred.

  • Screw-in tubular heaters
  • Ribbed Tubular Heaters
  • Convectors
  • Water heater
  • UL tubular heating elements in Ø8.5 and Ø6.5

Technical data:

  • Coat material stainless steel according to requirement
  • Maximum length of 8000 mm (Ø8, 5mm)
  • Surface load up to max. 15W/cm ²
  • Round versions Ø5, 0mm Ø6, 5mm Ø8, 5mm Ø16, 0mm
  • by 690V
  • High Voltage fixed to 2500V
  • Connection types
    • Threaded pin m3/M4/M6/M8
    • Battered strands also waterproof
    • Flat plug
    • Screw M4 or M5

Examples of bending shapes Rorhheizkörper

Tubular Heaters

Ribbed Tubular heaters from HKE-tec are used in temperatures below 200 °c as normal convection heaters (for air and gas), for example for heating outdoor vending machines, shop windows or sign bridges.
In addition, finned tubular heaters from HKE-tec are used for the production of hot air. In this case, the temperature is dependent on the media flow. The enlarged surface of galvanized metal ribs (which are pushed onto the tubular radiators) can be applied to smooth heating elements round tubular radiators with higher surface load. This results in lower surface temperatures and/or shorter lengths.

Product example

Rorhheizkörper Bent

Individual designs according to customer requirements

Connection examples

Tubular Heaters

Wavy

Rohrheizkoerper

Spirally wound

Tubular heating element spirally wound

Screw-in nipple

Screw-in nipple on tubular heating element

Meandering wound

Tubular heating element meandering bent with screw connection

Spiral

Tubular heating element D6.5 coiled with screw connection