Coil Heater Configurator

Standard Coil Heater diameter 2.2 × 4,2mm from HKE-Tec can be assembled shorttime with different internal diameters, lengths and connections.
Delivery time approx. 2-5 working days (subject to prior sale).
All common diameters, lengths and performances required for hot runner nozzles, distribution beams and plastic nozzles.

Technical data:
Cross section 2.2 × 4, 2mm, coat material stainless steel, max. Temperature 750 °c, connection voltage 230v, connecting leads PTFE up to 260 °C, Thermocouple Fe-CuNi type J

Inner Diameter Tolerance:
Up to IØ 11, 9mm – 0.05/ -0, 2mm
IØ 12.0 – 29, 9mm – 0.10/ -0, 30mm
IØ 30.0 – 50 mm – 0.20/ -0, 50mm
With Reflection tube: on Mandrel Ø "G6" These gearheads pressed by hand
Length tolerance stretched heated zone ± 2% (min. ± 5mm), minimum bending radius: 4mm