Temperature Controller

Overview

Controllers in all sizes from simple to complex
Front panel, device installation and DIN rail
/Ausregler, PID up to cascade control characteristics
One to multi-channel with universal inputs
SSR driver relay or with continuous control outputs.
Standard built-in controller PID ex stock
Should-is temperature colored in red and green
Table-Temperature unit single/multiple

Description
The type eTron is an electronic temperature controller with "on/off" switching behaviour. It is intended for installation in control cabinets or small housings for DIN rail mounting.
Installed in a Spelsberg enclosure with circuit breaker type HK-10 it can be used for mobile and fixed control tasks up to 10A and 500°C.

Application
All heating tasks from – 200 °c to + 500 °c

Default options
Voltage 230 VAC/24v PROBE PT 100/Type K/Type Nubian
Switching capacity 10 A changeover contact ?
Housing Dimensions 93.5 x 61.6 x 22.5 mm (h, D, b)

Operating instructions HK-10 Spelsberg download.

Table Temperature Controller PID

Standard - Specification for a measuring point:

Housing 240 x 124 x 196 mm (W x H x D)
ABS Material
Switch on/off switch on front side with lighting
Operating voltage 230 V
Cable 2,000 mm Power cord 3 x 1.5 ² with safety plug
Connections for thermo, load, alarm 10-pin harting Plug Han 10, or Schuko-Tuchelstecker
Approvals CE, EMV

Outputs:
HR Relay 16 A, zero voltage switch, built-in RC link
Relay Max. 5 A, 250 V for ohmic loads

Application:
Heating, cooling, up to 2 alarms, alarm limit as absolute value,
Relative value or window configurable, LBA for sensor break alarm,
Alarm events linked, alarm delay 60 ms

Control functions:
Control/mode PID, Pi without overshoot, PD, p, on/off
Manual/Automatic Stoßfrei
Selbstopimierung calculation of the PID parameters after the drive-in optimization
Auto-Tuning Permanent
Auto-drop compensation automatic calculation of PD parameters
Input signal 0... 60 MV
Sampling rate 120 ms
Kallibrierungsgenauigkeit 0.25% +/-1 digit
lineare Genauigkeit < 4 μV
Input filter 0... 20 sec. + Display of hysteresis in 0... 9.9 Units
Zero point correction adjustable in – 999... + 999 Scale Units

Thermocouples Types J, K, T, N, R, S, B, E
Compensation of the transitions of internal automatic adjustment
RDT's PT 100 Din 43710 (2-3 Ladder)
PTC PTC (1k/25 °c)
Linear type 0 — 60 mv
0 — 20 ma, 4... 20 ma, 0... 10 V

Power supply:
220... 240VAC 50/60 Hz

Controller for 2-10 measuring points on request

Power Controller

The Power controller HKLS 400 is used to control the power of electrical
Heating and is intended for commercial use. The unit operates according to the
Principle of the phase bleed. The control unit bears the CE mark and the VDEFunkschutz
EMC sign. The low Voltage Directive 73/23/EEC and the
Complied with the EMC Directive 89/336/EEC.

Technical data
Operating voltage: 230 V AC
Connection frequency: 47... 63 Hz
Maximum continuous load: 2000 watts
Control Range Typical: 10 V – 230 V
Security: 10 A
Control type: Phase bleed
Housing: 240 x 124 x 196 mm (W x H x D)
Material: ABS
Switch: On/off switch on the front side with lighting
Cable: 2,000 mm Power cord 3 x 1.5 ² with safety plug
Load connection: Push socket
Approvals: CE, EMV